MACHINE POLICIES

MACHINE

POLICIES

Manufacturing

3D PRINTERS

  • No printing weapons, drug paraphernalia, or any other items deemed inappropriate.

    • Cosplay weapons are not allowed in the Makerspace.

    • None of our machines or tools may be used to create weapons or anything that resembles a weapon.

  • Users may not load or unload prints on Makerspace 3D printers.

  • Users may load files on our computers and are required to get a technician once they are ready to load files onto machinery.

  • Finished prints will be available on the table next to the front doors.

    • Users must sign in when picking up prints.

    • Any prints left in the Makerspace for over 1 month will be considered Makerspace property and put in our PLA recycling bin.

  • The first 150g of filament is free (PLA).

    • All projects exceeding that amount should be printed with user filament. You may bring your own filament and use as much as you like.

    • No abrasive or high-temp filaments

    • Users are responsible for labeling their filament with their name (first and last).

    • Users who are seen using excessive amounts of filament will be asked to bring their own filament.

  • One printer per project per person.

    • If you are in a club, more people does not mean more filament.

  • For any print that takes 6+ hours, you will have to come in within the last two hours of opening so we can print it overnight.

    • Users may submit prints that take a maximum of 13 hours.

LASER CUTTERS

  • Users may not operate the laser cutter.

  • Users are required to prepare their print files and present them to technicians when they are ready to use our laser cutter.

  • We have scrap pieces of wood and acrylic; however, if you would like something of a specific color, wood, or size, please bring your own material.

    • You may use up to 12x12 inches of our plywood. After that, we require users to bring their own materials.

    • You may NOT bring wood from the wood shop into the laser room. These sheets are not suitable for the laser cutter and will result in failed projects.

  • Please double-check your material to see if it is safe to be used in a laser cutter beforehand, or bring the listing you purchased from so we can check for you.

    • Users are never allowed to use unknown materials on the laser cutter. All unknown materials will be assumed dangerous.

  • Maximum dimensions for material: 18 x 32 inches.

  • Yes, we can engrave water bottles. Please bring a clean, dry water bottle.

Soft Goods

SEWING MACHINES + SERGER

SEWING MACHINES +
SERGER

  • We have some scrap pieces of fabric in bins, free for public use, but if you would like to use a specific type/color of fabric, we recommend you bring your own.

  • Thread, fabric shears, measuring tapes, pins, tailor’s chalk, etc. are all available for checkout at the Makerspace.

  • Do not use thread you find around the Makerspace in the sewing machines. There is a high chance that the thread is for a different machine and could damage the sewing machine.

  • Student technicians can assist with threading bobbins and machinery.

EMBROIDERY MACHINE

  • Users may not operate the embroidery machine without a technician.

  • Users must bring their own garments/items to embroider on.

    • Embroidery thread is provided.

  • Specific policies apply for graduation sashes. See below.

GRADUATION SASH EMBROIDERY

GRADUATION SASH EMBROIDERY

  • Sash embroidery is by appointment only.

    • Appointments must be scheduled in person.

    • You may book an appointment up to 5 days in advance.

  • You may only embroider your own sash.

    • If you have a friend’s sash, they must come in and complete it themselves.

  • Sash embroidery is limited to name and major only.

  • We will not embroider images or flags, but you may purchase your own to iron on.

Please note: Errors can occur. The Makerspace is not responsible for any damage to sashes.

VINYL CUTTER

  • 36 square inch vinyl limit when using the vinyl on our rolls.

    • 6 x 6 inches of material is allowed for learning.

    • All designs exceeding this amount will be required to bring their own vinyl material.

  • Users are expected to bring in their own blank materials to print on (i.e., T-shirts, tote bags, etc.).

  • Unlimited vinyl scrap usage (smaller miscellaneous pieces we store in bins).

  • You may bring your own roll of vinyl and use as much as you like.

HEAT PRESS

  • Consult a technician if you are unsure of how to use the heat press.

Woodworking + Metalworking

Ground Rules


  • All machinery in the woodworking room requires technician approval before use.

  • You are REQUIRED to wear Personal Protective Equipment (PPE) before using any machine in the woodshop. Tie up any hair, remove jewelry before using machines.

  • Turn on the dust collector before using any heavy machinery. The remote is located on the front right wall of the room.

Ground Rules


  • All machinery in the woodworking room requires technician approval before use.

  • You are REQUIRED to wear Personal Protective Equipment (PPE) before using any machine in the woodshop. Tie up any hair, remove jewelry before using machines.

  • Turn on the dust collector before using any heavy machinery. The remote is located on the front right wall of the room.

MITER SAW

  • Secure the workpiece with clamps, NEVER hold material freehand near the blade 

  • Keep hands at least 6 inches from the blade path at all times

  • Let the blade reach full speed before cutting. Wait for it to fully stop before lifting

  • Never reach behind or under the blade guard

  • Stand to the side of the blade when cutting, not directly in line

  • When the machine is not running, ensure that the blade is down and locked, with the guard covering the blade.

  • Secure the workpiece with clamps, NEVER hold material freehand near the blade 

  • Keep hands at least 6 inches from the blade path at all times

  • Let the blade reach full speed before cutting. Wait for it to fully stop before lifting

  • Never reach behind or under the blade guard

  • Stand to the side of the blade when cutting, not directly in line

  • When the machine is not running, ensure that the blade is down and locked, with the guard covering the blade.

  • Secure the workpiece with clamps, NEVER hold material freehand near the blade 

  • Keep hands at least 6 inches from the blade path at all times

  • Let the blade reach full speed before cutting. Wait for it to fully stop before lifting

  • Never reach behind or under the blade guard

  • Stand to the side of the blade when cutting, not directly in line

  • When the machine is not running, ensure that the blade is down and locked, with the guard covering the blade.

BAND SAW

  • Ensure that the emergency stop is pushed in all the way at all times when the machine is not running.

  • Do not operate the machine without all guards in place.

  • Do not perform cutting operations that exceed machine capacity.

  • Do not force the machine to stall blade or breakage might occur.

  • Use only blades to correct specification for the material being cut.

  • When the machine is running, DO NOT have hands within the blue rectangle surrounding the saw.

TABLE SAW

  • This machine requires special training and an appointment before use. 

    • Appointments may be scheduled by emailing makerspace@orl.ucla.edu

    • It can take 2-3 weeks to schedule machine trainings

CNC ROUTER + CNC MILL

  • This machine requires special training and an appointment before use. 

    • Appointments may be scheduled by emailing makerspace@orl.ucla.edu

    • It can take 2-3 weeks to schedule machine trainings

DISC SANDER

  • Ensure the work table/fence is properly adjusted and locked at the correct angle 

  • Feed material into the left side of the disk only to keep work pressed against the table. Only use the flat face to sand pieces. 

  • Keep fingers and hands clear of the disk face and edges at all times 

  • Keep the workpiece moving to avoid any burning

  • Ensure the work table/fence is properly adjusted and locked at the correct angle 

  • Feed material into the left side of the disk only to keep work pressed against the table. Only use the flat face to sand pieces. 

  • Keep fingers and hands clear of the disk face and edges at all times 

  • Keep the workpiece moving to avoid any burning

  • Ensure the work table/fence is properly adjusted and locked at the correct angle 

  • Feed material into the left side of the disk only to keep work pressed against the table. Only use the flat face to sand pieces. 

  • Keep fingers and hands clear of the disk face and edges at all times 

  • Keep the workpiece moving to avoid any burning

DRUM SANDER

  • Set the correct feed rate and drum height for the material thickness; never take more than a 1/32" pass per run 

  • Do not stop feeding a workpiece while the drum is running to avoid burning and damage to the material and the drum.

  • Keep hands away from the openings while the drum is spinning

  • Always use the full width of the conveyor. Do not skew boards at sharp angles

  • Do not sand material shorter than the distance between the opening rollers without a backer board

  • Never sand materials embedded with metals like nails or screws.

  • Power off and wait for the drum to fully stop before making any height adjustments

LATHE

  • This machine requires special training and an appointment before use. 

    • Appointments may be scheduled by emailing makerspace@orl.ucla.edu

    • It can take 2-3 weeks to schedule machine trainings

DRILL PRESS

  • Ensure that the emergency stop is pushed in all the way at all times when the machine is not running.

  • Do not operate the machine without all guards in place.

  • Secure the workpiece with clamps, NEVER hold material freehand

  • Ensure that the emergency stop is pushed in all the way at all times when the machine is not running.

  • Do not operate the machine without all guards in place.

  • Secure the workpiece with clamps, NEVER hold material freehand

  • Ensure that the emergency stop is pushed in all the way at all times when the machine is not running.

  • Do not operate the machine without all guards in place.

  • Secure the workpiece with clamps, NEVER hold material freehand

Woodworking

Metalworking

Electronics

SOLDERING IRONS

  • Place the soldering iron only in an approved, stable iron holder/stand, never rest it on a workbench

  • Keep the workspace clear of flammable materials (paper, solvents, plastics)

  • Never leave plugged in iron unattended. Turn off the iron when not in use.

  • Allow the iron to reach operating temperature before use and allow it to fully cool before storing. Do Not touch the tip or heating element. Temperatures can reach above 300°F 

  • Wipe the tip on a damp sponge or brass wire cleaner only

  • Secure workpieces with clamps or a tool. Do not hold parts with bare hands near the work area

  • Always work using a fan or near active ventilation to avoid breathing in solder.

  • Place the soldering iron only in an approved, stable iron holder/stand, never rest it on a workbench

  • Keep the workspace clear of flammable materials (paper, solvents, plastics)

  • Never leave plugged in iron unattended. Turn off the iron when not in use.

  • Allow the iron to reach operating temperature before use and allow it to fully cool before storing. Do Not touch the tip or heating element. Temperatures can reach above 300°F 

  • Wipe the tip on a damp sponge or brass wire cleaner only

  • Secure workpieces with clamps or a tool. Do not hold parts with bare hands near the work area

  • Always work using a fan or near active ventilation to avoid breathing in solder.

  • Place the soldering iron only in an approved, stable iron holder/stand, never rest it on a workbench

  • Keep the workspace clear of flammable materials (paper, solvents, plastics)

  • Never leave plugged in iron unattended. Turn off the iron when not in use.

  • Allow the iron to reach operating temperature before use and allow it to fully cool before storing. Do Not touch the tip or heating element. Temperatures can reach above 300°F 

  • Wipe the tip on a damp sponge or brass wire cleaner only

  • Secure workpieces with clamps or a tool. Do not hold parts with bare hands near the work area

  • Always work using a fan or near active ventilation to avoid breathing in solder.

HOURS OF OPERATION


Mon–Fri: 12:00 PM – 9:30 PM
Sat–Sun: 12:00 PM – 5:30 PM

LOCATION


267 De Neve Dr #475
Los Angeles, CA 90024

© 2026 • Makerspace on The Hill

Create a free website with Framer, the website builder loved by startups, designers and agencies.